个人简介

凌意瀚，男，1986年5月出生，材料科学与工程学院，副教授，安徽池州人。2008年7月于南京航空航天大学获学士学位，2013年7月于中国科学技术大学获工学博士学位，2013年至2015年在日本东北大学作为JSPS外国人特别研究员(JSPS Fellow)进行研究，2015年9月起任职于中国矿业大学材料科学与工程学院。主要从事无机非金属材料的合成科学，探索应用于洁净能源和环境工程的新材料，着重研究材料的结构和性能的关联性研究，并致力于电化学器件的原位表征技术。研究对象主要为固体氧化物燃料电池及其相关材料，全固态锂离子电池及相关材料，无机膜材料和过程，污染物分离转化及资源化、无机固体废弃物及矿物资源化等。曾参与国家自然科学基金重大项目、面上项目及科技部973计划项目等，现主持中国矿业大学启动基金等项目。目前已在J. Mater. Chem. A, J. Membr. Sci., J. Power Sources, Phys. Chem. Chem. Phys., Int. J. Hydrogen Energy, RSC Adv. , Electrochi. Acta等国际期刊上合作发表SCI论文35篇, 其中第一作者15篇，通讯作者4篇，并获得国家授权发明专利多项。Email：lyhyy@cumt.edu.cn

获奖、荣誉称号

2017年德国 洪堡学者

2013年日本JSPS Fellow

2013年中科院院长奖

2012年中国科学技术大学“研究生国家奖学金”

2010年中国科学技术大学“东港奖学金”

研究领域

主要从事无机非金属材料的合成科学，探索应用于洁净能源和环境工程的新材料，着重研究材料的结构和性能的关联性研究，并致力于电化学器件的原位表征技术。研究对象主要为固体氧化物燃料电池及其相关材料，全固态锂离子电池及相关材料，无机膜材料和过程，污染物分离转化及资源化、无机固体废弃物及矿物资源化等。

科研项目

中国矿业大学人才引进项目

发表论文

Nakamura T., Ling Y.H., Amezawa K.(2015):The effect of interstitial oxygen formation on the crystal lattice deformation in layered perovskite oxides for electrochemical devices, Journal of Materials Chemistry A, 3:10471-10479

Ling Y.H., Wang F., Budiman R.A., Nakamura T., Amezawa K. (2015):Oxygen nonstoichiometry, the defect equilibrium model and thermodynamic quantities of the Ruddlesden–Popper oxide Sr3Fe2O7-δ, Physical Chemistry Chemical Physics,17:7489-7497

Ling Y.H., Chen L.Y., Lin B., Yu W.L., Isimjan T.T., Zhao L., Liu X.Q.(2015): Synthesis and characterization of Sr0. 95Y0.05TiO3-δ-based hydrogen electrode for reversible solid oxide cells, RSC Advances, 5:17000-17006.

Ling Y.H., Wang Z.B., Wang Z.Q., Peng R.R., Lin B., Yu W.L., Isimjan T. T., Lu Y.L.(2015):A robust carbon tolerant anode for solid oxide fuel cells, Science China Materials, 58:204-212

Ling Y., Zhao L., Liu X., Lin B.(2015): Tailoring Electrochemical Property of Layered Perovskite Cathode by Cu-doping for Proton-Conducting IT-SOFCs, Fuel Cell,15:384-389.

Shao Q., Ge W.J., Lu X.Y., Chen Y.H., Ding Y.Z., Lin B., Ling Y.H.(2015):A promising cathode for proton-conducting intermediate temperature solid oxide fuel cells: Y0.8Ca 0.2BaCo4O7+δ,Ceramics International, 41:6687-6692

He B.B., Ding D., Ling Y.H., Xu J.M., Zhao L.,(2015):Efficient modification for enhancing surface activity of Ba0.5Sr0.5Co0.8Fe0.2O3-δ oxygen permeation membrane, Journal of Membrane Science,477:7-13.

He B.B., Zhang L., Zhang Y.X., Ding D., Xu J.M., Ling Y.H., Zhao L.(2015): New insight into highly active cathode of proton conducting solid oxide fuel cells by oxygen ionic conductor modification, Journal of Power Source, 287:170-176.

Ling Y.H., Wang F., Zhao L., Liu X.Q., Lin B.(2014):Comparative study of electrochemical properties of different composite cathode materials associated to stable proton conducting BaZr0.7Pr0.1Y0.2O3-δ electrolyte, Electrochimica Acta,146:1-7.

Zhao L. , Ding D., Zhang L., Gui L.Q., Wang Z.H., Wan Y.H., Wang R.R., Ling Y.H., He B.B.(2014):The effect of Cr deposition and poisoning on BaZr0.1Ce0.7Y0.2O3−δ proton conducting electrolyte,International Journal of Hydrogen Energy, 39:18379-18384.

He B.B., Ling Y.H., Xu J.M., Zhao L., Cheng J.G.(2014):Effect of nickel impregnated hollow fiber anode for micro tubular solid oxide fuel cells, Journal of Power Sources, 258:391-394.

He B.B., Ding D., Ling Y.H., Zhao L., Cheng J.G.(2014):Fabrication and evaluation of stable micro tubular solid oxide fuel cells with BZCY-BZY bi-layer proton conducting electrolytes, International Journal of Hydrogen Energy, 39:19087-19092

He B.B., Zhang K., Ling Y.H., Xu J.M., Zhao L. (2014): A surface modified La0.6Sr0.4Co0.2Fe0.8O3-δ ultrathin membrane for highly efficient oxygen separation, Journal of Membrane Science, 464: 55-60.

Lei Z.W., Huang Y., Liu M., Ge W., Ling Y.H., Peng R.R., Mao X.Y., Chen X.B., Lu Y.L.(2014):Ferroelectric and ferromagnetic properties of Bi7−xLaxFe1.5Co1.5Ti3O21 ceramics prepared by the hot-press method,Journal of Alloys and Compounds, 600:168-172.

Ling Y.H., Zhang X.Z., Wang Z.B., Wang S.L., Zhao L., Liu X.Q., Lin B. (2013): Potentiality of cobalt-free perovskite Ba0.5Sr0.5Fe0.9Mo0.1O3−δ as a single-phase cathode for intermediate-to-low temperature solid oxide fuel cells, International Journal of Hydrogen Energy, 38:14323-14328.

Ling Y.H., Chen J., Wang Z.B., Xia C.R., Peng R.R., Lu Y.L.(2013):New ionic diffusion strategy to fabricate proton-conducting solid oxide fuel cells based on a stable La2Ce2O7 electrolyte, International Journal of Hydrogen Energy, 38:7430-7437.

Sun S.J., Ling Y.H., Peng R.R., Liu M., Mao X.Y., Chen X.B., Knize R.J., Lu Y.L.(2013): Synthesis of Ni-substituted Bi7Fe3Ti3O21 ceramics and their superior room temperature multiferroic properties,RSC Advances, 3:18567-18572.

Ling Y.H., Yao X.H., Zhang X.Z., Liu X.Q., Lin B.(2012): Development of a novel type of composite cathode material for proton-conducting solid oxide fuel cells, International Journal of Hydrogen Energy, 37:5940-5945.

Zhong W., Ling Y.H., Rao Y.Y., Peng R.R., Lu Y.L. (2012): Calcium doped Y3Fe5O12 as a new cathode material for intermediate temperature solid oxide fuel cells,Journal of Power Sources, 213:140-144.

Ling Y.H., Yu J., Lin B., Zhang X.Z., Zhao L., Liu X.Q.(2011): A cobalt-free Sm0.5Sr0.5Fe0.8Cu0.2O3-δ-Ce0.8Sm0.2O2-δ composite cathode for proton-conducting solid oxide fuel cells,Journal of Power Sources, 196:2631–2634.

Dong Y.C., Lin B., Zhou J.E., Zhang X.Z., Ling Y.H., Liu X.Q., Meng G.Y., Hampshire S.(2011): Corrosion resistance characterization of porous alumina membrane supports,Materials Characterization, 62:409-418.

Ling Y.H., Zhao L., Lin B., Dong Y.C., Zhang X.Z., Meng G.Y., Liu X.Q.(2010): Investigation of cobalt-free cathode material Sm0.5Sr0.5Fe0.8Cu0.2O3-δfor intermediate temperature solid oxide fuel cell, International Journal of Hydrogen Energy, 35:6905-6910.

Ling Y.H., Zhang X.Z., Wang S.L., Zhao L., Lin B., Liu X.Q.(2010): A cobalt-free SrFe0.9Sb0.1O3-δcathode material for proton-conducting solid oxide fuel cells with stable BaZr0.1Ce0.7Y0.1Yb0.1O3-δ electrolyte, Journal of Power Sources, 195:7042–7045.

Ling Y.H., Lin B., Zhao L., Zhang X.Z., Yu J., Peng R.R., Meng G.Y., Liu X.Q.(2010): Layered perovskite LaBaCuMO5+x (M = Fe, Co) cathodes for intermediate-temperature protonic ceramic membrane fuel cells, Journal of Alloys and Compounds, 493:252–255.

Zhao L., He B.B., Ling Y.H., Xun Z.Q., Peng R.R., Meng G.Y., Liu X.Q.(2010):Cobalt-free oxide Ba0.5Sr0.5Fe0.8Cu0.2O3−δ for proton-conducting solid oxide fuel cell cathode,International Journal of Hydrogen Energy, 35:3769-3774.

Lin B., Chen J.F., Ling Y.H., Zhang X.Z., Jiang Y.Z., Zhao L., Liu X.Q., Meng G.Y.(2010): Low-temperature solid oxide fuel cells with novel La0.6Sr0.4Co0.8Cu0.2O3−δ perovskite cathode and functional graded anode, Journal of Power Sources, 195:1624-1629.

Zhang X.Z., Lin B., Ling Y.H., Dong Y.C., Meng G.Y., Liu X.Q.(2010):An anode-supported hollow fiber solid oxide fuel cell with (Pr0.5Nd0.5)0.7Sr0.3MnO3−δ–YSZ composite cathode, Journal of Alloys and Compounds, 497:386-389.

Zhang X.Z., Lin B., Ling Y.H., Dong Y.C., Meng G.Y., Liu X.Q.(2010):An anode-supported micro-tubular solid oxide fuel cell with redox stable composite cathode, International Journal of Hydrogen Energy, 35:8654-8662.

Dong Y.C., Hampshire S., Lin B., Ling Y.H., Zhang X.Z.(2010): High sintering activity Cu–Gd co-doped CeO2 electrolyte for solid oxide fuel cells, Journal of Power Sources, 195:6510-6615.

Zhang X.Z., Lin B., Ling Y.H., Dong Y.C., Fang D.R., Meng G.Y., Liu X.Q.(2010):Highly permeable porous YSZ hollow fiber membrane prepared using ethanol as external coagulant, Journal of Alloys and Compounds, 494:66-371.

Zhao L., He B.B., Lin B., Ding H.P., Wang S.L., Ling Y.H., Peng R.R., Meng G.Y., Liu X.Q.(2009):High performance of proton-conducting solid oxide fuel cell with a layered PrBaCo2O5+δ cathode, Journal of Power Sources, 194:835-837.